Environmental profile

Weight: 93.52grams (including battery)

Dimensions: Height 168.0mm x Width 78.58 mm x Thickness 10.45 mm

Volume: 138.21cc (cm3)

Weight (Net):

137.06 grams (with charger EU) 144 grams (with charger UK) 131.82 grams (with charger US)

Dimensions: Length 183.5mm x Width 92.5mm x Height 54.5mm

Volume: 925.07 (cm3)

Material: 350 grm kraft paper, 1.5mm grey board

Materials and substances

• Free of brominated and chlorinated compounds and antimony trioxide, as defined in HMD Substance List_1.0 2023
• Free of PVC
• Free of nickel on the product surface

Packaging

• Made of renewable material
• Packaging is 100% recyclable
• Minimized package

Recycling

• All materials of the device can be recovered as materials, and the recoverability rate of device material is up to 81%.

User guide

• Four colour printing

Energy efficiency

• Charger fulfill EU VI standard

Through careful material selection we aim to reduce the environmental impact of our products. The chart below shows the estimated proportions of the materials used to create this mobile device.

• Metals: E.g. stainless steel, copper, zinc, aluminium. Our products contain ~0.1-0.2% precious metals.
• Ceramic materials: Glass, other ceramics.
• Plastics: E.g. ABS/PC, PET, PA, epoxy.
• Battery: E.g. lithium cobalt compound, graphite, aluminium, copper.

• Other: Non-metals such as silicon. Other materials such as glues.

• Metals: 7%
• Ceramic materials: 12%
• Plastics: 48%
• Battery: 30%
• Other: 3%

We proactively manage and keep track of all the substances in our products, not just those that raise concerns. We have strict requirements for substances that are not allowed in our products.

This product fully complies with all relevant global regulations, for example:

• The EU RoHS Directive 2011/65/EU
• “Management Methods on the Prevention and Control of Pollution caused by Electronic Information Products” commonly known as “China RoHS”
• European REACH Regulation 1907/2006/EC
• The Montreal Protocol on Substances That Deplete the Ozone Layer

Additionally, we have voluntarily restricted the use of many other harmful substances, and called attention to substances such as skin sensitizers and substances that might cause harm to the environment or to the user during the lifecycle of the product.

Some details of such substances for this product are listed below:

• The surface of this device is nickel-free
• This product does not contain Brominated or Chlorinated compounds or Antimony trioxide as specified in HMD Substance List_1.0 2023
• Polyvinylchloride (PVC) is not used in this product or its packaging

The supplied battery complies with the EU Battery Directive 2013/56/EU and does not contain cadmium, lead, or mercury in concentrations higher than those defined in the directive.

Call (GSM) : 266 mW

Call (WCDMA) : 665 mW

Call (VoLTE) : 665 mW

Idle mode (DS): 19 mW

Battery capacity: BL-L5H, 1450 mAh

Battery weight: 29 grams

Charger：

Manufacturer/Producer: Baijunda

Model (EU): HAC-18E

Model (UK): HAC-18X

Model (US): HAC-18U

Input voltage: 100-240 V

Input AC Frequency: 50/60 Hz

Output voltage: 5.0 V

Output current: 0.55 A

Output power: 2.75 W

Average active efficiency: 69.03 %

Efficiency at low load (10 %): 59.9 %

Charger no-load power consumption: 0.075 W

Charger weight(EU): 35 grams

Charger weight(UK): 48 grams

Charger weight(US): 40 grams

We work to minimize the environmental impact of our packaging by selecting sustainable materials, reducing the packaging size, reducing the volume of material we use, and considering what happens to the package when it is no longer needed.

Our packaging contains no hazardous or restricted substances, and is fully compliant with the EU directive 2013/2/EU.

Always return your used electronic products, batteries, and packaging materials to a dedicated recycling collection point. This way you help prevent uncontrolled waste disposal and promote the recycling of materials.

• This product and its battery have been marked with the crossed-over wastebasket symbol (WEEE Directive) to signify that they must not be disposed of with regular household waste and need to be taken instead to an appropriate collection point.
• All mechanical parts as well as packaging materials have been marked where practically possible.iPlastic parts are marked in accordance with ISO 11469 and ISO 1043-1 to -4 standards.