Nokia 8210 4G user guide

Skip to main content
We need a better phone for our mental health. Learn more about The Better Phone Project and join our discussion "Attention and finding balance"
All Devices
Download

Nokia 8210 4G

Download

Set up and switch on your phone

Nano-SIM

Nano-SIM
Important: This device is designed to be used with a nano-SIM card only. Use of incompatible SIM cards may damage the card or the device, and may corrupt data stored on the card.
Note: Switch the device off and disconnect the charger and any other device before removing any covers. Avoid touching electronic components while changing any covers. Always store and use the device with any covers attached.

Open the back cover

Open the back cover
  1. Put your fingernail in the small slot at the top of the phone, lift and remove the cover.
  2. If the battery is in the phone, lift it out.

Insert the SIM card

Insert the SIM card
  1. Slide the SIM card holder towards the top of the phone and open it up.
  2. Place the SIM card in the slot, close down the holder, and slide it towards the bottom of the phone to lock it in place.
Tip: To find out if your phone can use 2 SIM cards, see the label on the sales box. If there are 2 IMEI codes on the label, you have a dual-SIM phone.

Insert the memory card

Insert the memory card
  1. If you have a memory card, slide it in the memory card slot.
  2. Put back the battery.
  3. Put back the back cover.
Tip: Use a fast, up to 32 GB microSD memory card from a well-known manufacturer.

Switch on your phone

Press and hold .
Did you find this helpful?

Useful Links

Software UpdatesFull SpecificationsEnvironmental Profile
Get started
  • Keys and parts
  • Set up and switch on your phone
  • Charge your phone
  • Keypad

Set Location And Language