Important: This device is designed to be used with a nano-SIM card only. Use of incompatible SIM cards may damage the card or the device, and may corrupt data stored on the card.
Note: Switch the device off and disconnect the charger and any other device before removing any covers. Avoid touching electronic components while changing any covers. Always store and use the device with any covers attached.
Open the back cover
Put your fingernail in the small slot at the top of the phone, then lift and remove the cover.
If the battery is in the phone, lift it out.
Insert the SIM card
Slide the SIM card holder towards the top of the phone and open it up.
Place the SIM card in the slot, close down the holder and slide it towards the bottom of the phone to lock it in place.
Tip: To find out if your phone can use 2 SIM cards, see the label on the sales box. If there are 2 IMEI codes on the label, you have a dual-SIM phone.
Insert the memory card
If you have a memory card, slide it in the memory card slot.
Put back the battery.
Put back the back cover.
Tip: Use a fast, up to 32 GB microSD memory card from a well-known manufacturer.