Nokia 2720 user guide
Skip to main content
Set up and switch on your phone
Learn how to insert the SIM card, memory card, and battery, and how to switch on your phone.
Nano-SIM
Važno: Ovaj uređaj je dizajniran za korištenje samo s nano-SIM karticom. Upotrebom nekompatibilnih SIM kartica možete oštetiti karticu ili uređaj te podatke pohranjene na kartici.
memorijske kartice MicroSD
Za upotrebu s ovim uređajem upotrebljavajte samo kompatibilne memorijske kartice. Kartice koje nisu kompatibilne mogu oštetiti karticu i sam uređaj te podatke pohranjene na kartici.
Napomena: Isključite uređaj i iskopčajte punjač i sve ostale uređaje prije uklanjanja kućišta. Izbjegavajte dodirivanje elektroničkih komponenti tijekom mijenjanja poklopaca. Uvijek spremajte i koristite uređaj s pričvršćenim poklopcima.
Set up your phone
- Remove the back cover.
- If the battery is in, lift it out.
- Slide the SIM card holder to the left and open it up. Place the nano-SIM in the slot face down, close down the holder and slide it to the right to lock it in place.
- If you have a dual-SIM phone, slide the SIM2 holder to the left and open it up. Place the nano-SIM in the SIM2 slot face down, close down the holder and slide it to the right to lock it in place. Both SIM cards are available at the same time when the device is not being used,but while one SIM card is active, for example, making a call, the other may be unavailable.
- Put back the battery.
- Put back the cover.
Insert the memory card
- Remove the back cover.
- If the battery is in, lift it out.
- Slide the memory card in the memory card slot.
- Put back the battery.
- Put back the cover.
Switch on your phone
Press and hold the power key until the phone vibrates.
Select which SIM card to use
- Press the scroll key and select
Settings >Network & Connectivity >SIM manager . - To choose which SIM to use for calls, select
Outgoing Calls , and selectSIM1 orSIM2 . - To choose which SIM to use for messages, select
Outgoing messages , and selectSIM1 orSIM2 . - To choose which SIM to use for mobile data, select
Data , and selectSIM1 orSIM2 .
Tip: To be able to distinguish your SIM cards, give them a descriptive name. In the SIM manager settings, select each SIM card, type in the name, and select Save .