Nokia 110 4G 2021 user guide
Skip to main content
Set up and switch on your phone
Nano-SIM
Important: This device is designed to be used with a nano-SIM card only. Use of incompatible SIM cards may damage the card or the device, and may corrupt data stored on the card.
Note: Switch the device off and disconnect the charger and any other device before removing any covers. Avoid touching electronic components while changing any covers. Always store and use the device with any covers attached.
Open the back cover
- Place your fingernail in the small slot at the bottom of the phone, then lift and remove the cover.
- If the battery is in the phone, take it out.
Insert the SIM card
- Slide the SIM card holder towards the top of the phone and open it up.
- Place the nano SIM in the SIM slot face down.
- Close down the holder, and slide it towards the bottom of the phone to lock it in place.
Insert the second SIM
- Slide the SIM card holder of the SIM2 slot to the left and open it up.
- Place the nano SIM in the SIM2 slot face down.
- Close down the holder and slide it to the right to lock it in place. Both SIM cards are available at the same time if neither of them is being used, but while one SIM card is active, for example, making a call, the other may be unavailable.
Tip: To find out if your phone can use 2 SIM cards, see the label on the sales box. If there are 2 IMEI codes on the label, you have a dual-SIM phone.
Insert the memory card
- Slide the memory card in the memory card slot.
- Put the battery back in.
- Replace the back cover.
Tip: Use a fast, up to 32 GB microSD memory card from a well-known manufacturer.
Switch on your phone
Press and hold .