Your battery has been partially charged at the factory, but you may need to recharge it before you can use your phone.
Charge the battery
Plug the charger into a wall outlet.
Connect the charger to the phone. When done, unplug the charger from the phone and then from the wall outlet.
If the battery is completely discharged, it may take several minutes before the charging indicator is displayed.
Tip: You can use USB charging when a wall outlet is not available. Data can be transferred while charging the device. The efficiency of USB charging varies significantly and it may take a long time for charging to start and for the device to start functioning. Make sure that your computer is switched on.
Save power
To save power:
Charge wisely: Always charge the battery fully.
Select only the sounds that you need: mute any sounds you don‘t wish to use, such as keypad sounds.
Use wired headphones, rather than the speaker.
Change the phone screen settings: set the phone screen to switch off after a short time.
Lower the screen brightness.
When applicable, use network connections, such as Bluetooth, selectively: switch the connections on only when you are using them.